IV Pump, Sapphire Multi-Therapy

Description

Accurate infusion care, simple, fast, effective, and future-ready.
Be empowered with a complete infusion system that delivers multiple therapies, for home care, hospitals, and ambulatory settings. Sapphire drives the future of infusion care.

The Sapphire pump is a sturdy performer packed in a small, simplified design.
Programming is quick and easy on its intuitive touchscreen, for setting its feature-rich functionality that combines patented magnetic flow control innovation.
With its maximized reliability, low-flow continuity, and built-in adaptability that meets
any new requirement, Sapphire simplifies patient care with confidence for the long-run.Single solution fits all, for any infusion need.

The Sapphire Multi-Therapy Infusion Pump has the following features:
• Compact, lightweight device that is intuitive and easy to use
• Consistent accuracy with robust performance
• Single solution fits all, for any infusion need
• Software-driven and built-in adaptability

The following accessories are included with the purchase of the Q Core Medical Sapphire Multi-Therapy Infusion Pump:
• One (1) Q Core Medical Sapphire Infusion Pump
• One (1) Q Core Medical Sapphire Infusion Pump AC Power Cord – 15070-112-0005

Dimensions: 143 x 96 x 49 mm (5.63 x 3.78 x 1.93 in.) (H x W x D)
Weight (excluding battery): 418 g (14.7 oz.)
Indications: Intravascular, subcutaneous, intra-arterial, epidural
Indicated Use: The pump is intended to be used by licensed health care professionals in a clinical environment, home users in an ambulatory environment and in pre-hospital medical air and ground transportation
EMS Standard: IEC 60601-1-12 – Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment.
Drug Library: Holds up to 40 different clinical care areas and 1,000 drugs per area
Infusion device: Volumetric, peristaltic
Delivery Modes: Continuous, PCA, Intermittent, Multi- Step, TPN, Epidural
Accuracy: ±2.5% under normal conditions (per IEC60601-2-24 standard)
Flow Rate: 0.1 – 999 mL/h. & 0.1 – 99.9 mL/h in increments of 0.1 mL/h 100 – 999 mL/h in increments of 1 mL/h
Volume (VTBI): 0.1 – 9999 mL in increments of 0.1 mL
Power Supply: 100 – 240V 50-60 Hz, 0.6A
Battery Type: Rechargeable Li-Ion battery 7.4V, 1960 mA/h
Battery Life: 24 hrs @ 125 mL/h Recharge time: up to 6 hrs
Downstream occlusion: Up to 17.4 PSI (1.2 bar or 900 mmHg)
Temperature: Operating Temperature: +5° (41°F) to 40°C (104°F)
Storage/Transiet Temperature: -40°C (-40°F) to +70°C (+158°F)
Pumping mechanism: Single-channel volumetric, with integral pressure sensor
Infusion delivery modes: PCEA – Patient Controlled Epirdual Anelgasia & Epidural Intermittent
KVO rate: Up to 20 mL/h in increments of 0.1 mL/h
Accuracy: ±2.5% under normal conditions (per IEC60601-2-24 standard)
Battery: Rechargeable Li-Ion battery 7.4V, 1960 mA/h, 24 hrs @ 125 mL/h (with a fully charged battery and backlight Off) Recharge time is up to 6 hrs (when pump is not in operation)
Air in line sensor: A sensor detects single and accumulated bubbles of selectable sizes varying from 0.02 mL – 0.5 mL
Operating temperature: +5° (41ºF) to 40°C (104ºF)
Water ingress and dust protection: IP24 according to IEC 60601-1-11
Prime: Manual or automatic priming (600 mL/h, or from air in line alarm 900 mL/h)